Cast concrete
Zabudov's mixture No. 117 Concrete-monolith is a cement-sand mixture that is widely used in construction. It is intended for concreting monolithic concrete and reinforced concrete structures and has a consumption of about 1800 kg per cubic meter. This mixture contains mineral binders and coarse quartz sand.
Packaging
| Paper bags | 25, 40 kg |
| Pallet | 1000 kg |
Technical characteristics
| Composition: mineral binders, fractionated quartz sand. | |
| Bulk density | 1700 kg/m3±10% |
|
Base temperature RSS No. 117.3 |
from +5оС to +30оС from -10оС to 0оС |
| Proportion of solution per 1 kg of dry mixture | 120 -140 ml water |
| Mortar grade based on compressive strength | M150 |
| Mortar grade according to frost resistance | F100 |
Recommended consumption: 1800 kg of dry mixture per 1 m3.
Preparation of the solution: Pour the dry mortar mixture evenly into clean water and mix vigorously by hand or machine until a homogeneous mass is obtained.
Note: It is recommended to carry out work at a base temperature of +5оС up to +30oС. All recommendations are effective at a temperature of +20oC and a relative air humidity of 60%. The solution mixture is alkaline, so if the solution gets into your eyes, rinse them thoroughly with clean water and consult a doctor.
Recommendation: Work must be carried out in accordance with the rules and regulations of the construction industry. The instructions cannot replace the professional training of the person performing the work. The manufacturer is not responsible for improper use and storage of the material, as well as for its use for purposes and conditions not provided for in the instructions. The products comply with STB 1307-2012.
Important!Carry out work at a base temperature of +5 to +30°C. Optimally - at a temperature of +20°C and a relative air humidity of 60%. If the solution gets into your eyes, rinse them with plenty of water and consult a doctor.